The Hydraulic Single Bale Lifter from Dowd Engineering offers a main frame manufactured from 100mm x 100mm x 8mm Box Cradles made from 88.9mm x 4mm tube. The tubes are capped with full dome ends to prevent damage to bales and all pivot points are made from hardened steel pins, in heavy bushings and are greaseable. This model also offers a double flap locking system. The robust single bale lifter is finished with zinc phosperious primer and two pac industrial gloss top coat and all stress points are plated and reinforced. Standard Cat 2 linkage so can be used on rear or front linkage and is supplied with linkage pins.
The Hydraulic Single Bale Lifter from Dowd Engineering offers a main frame manufactured from 100mm x 100mm x 8mm Box Cradles made from 88.9mm x 4mm tube. The tubes are capped with full dome ends to prevent damage to bales and all pivot points are made from hardened steel pins, in heavy bushings and are greaseable. This model also offers a double flap locking system. The robust single bale lifter is finished with zinc phosperious primer and two pac industrial gloss top coat and all stress points are plated and reinforced. Standard Cat 2 linkage so can be used on rear or front linkage and is supplied with linkage pins.
© 2024 Farm Compare Ltd. All rights reserved| T&Cs | Privacy policy | Website by Reflex Studios
This website was developed with support from Priority 6 (LEADER) of the Northern Ireland Rural Development Programme 2014-2020 by the Department of Agriculture, Environment and Rural Affairs and the European Agricultural Fund for Rural Development: Europe investing in rural areas