Typically you will order feed on a weekly, fortnightly or Monthly basis. Check with your feed mill to see what the pricing options are – you might get a better deal for ordering 6 ton instead of 4 ton. Remember you usually will have a bit left in the silo - so if you are ordering 6 ton of feed you probably need an 8 ton capacity silo.
Rations/Blends are bulkier than ordinary pellets – all our silos are sized in cubic feet. Check the charts and the density of your feed to make sure you buy a big enough silo
Enclosed silos are ideal where you are using bags or barrows – the feed is not caught in the wind and you are protected from the weather.
Legged silos are ideal for connecting to auger systems – they can also be used to fill bags and barrows
Offset silos are ideal if you are filling loader buckets – with the cone to the side any sized bucket can be used.
There are 3 main reasons for getting a silo
The rolled body has a seam around the outside of the silo which is watertight and adds additional strength to the body. As the seam is on the outside of the silo the inside wall is smooth with only a few bolts to attach brackets. This leaves very little opportunity for feed to stick to the walls.
V-Mac Silos are manufactured in Ireland by McAree Engineering – they have been making silos since 1967 and are one of the largest manufacturers of silos in Ireland and the UK.
Typically you will order feed on a weekly, fortnightly or Monthly basis. Check with your feed mill to see what the pricing options are – you might get a better deal for ordering 6 ton instead of 4 ton. Remember you usually will have a bit left in the silo - so if you are ordering 6 ton of feed you probably need an 8 ton capacity silo.
Rations/Blends are bulkier than ordinary pellets – all our silos are sized in cubic feet. Check the charts and the density of your feed to make sure you buy a big enough silo
Enclosed silos are ideal where you are using bags or barrows – the feed is not caught in the wind and you are protected from the weather.
Legged silos are ideal for connecting to auger systems – they can also be used to fill bags and barrows
Offset silos are ideal if you are filling loader buckets – with the cone to the side any sized bucket can be used.
There are 3 main reasons for getting a silo
The rolled body has a seam around the outside of the silo which is watertight and adds additional strength to the body. As the seam is on the outside of the silo the inside wall is smooth with only a few bolts to attach brackets. This leaves very little opportunity for feed to stick to the walls.
V-Mac Silos are manufactured in Ireland by McAree Engineering – they have been making silos since 1967 and are one of the largest manufacturers of silos in Ireland and the UK.